Gab about COPIC Ciao Markers Refills

Hello and welcome to another crafty chat on my blog. Today I’m talking about ways to get more life out of your Copic Markers; my Copic of choice is usually a Ciao marker. I chose Ciaos because the come in 180 colors at a lower price point than the Sketch version. Quite frankly, those are enough colors for me and it allowed me to buy more colors when I was starting out. Ink refills are available for all of the Ciao colors as well as replacement Super Brush Nibs. But how to refill them?

You will need:

-Your dried out markers

-Matching refills

-A gram scale

-Some patience  

To check all of my markers (approximately 105) and refill the ones in need (approximately 10) it took me about 1.5 hours.

I found many videos on the Sketch markers, but not much on Ciaos. The technique is the same, but the amount of ink needed varies. For a new Ciao, I weighed it with the caps on and found it to be between 10-11 grams. 

I then weighed a marker I knew was drying out and got a weight of 8-9g. I put those to the side and then weighed my refill with the cap off, a full refill weighs about 26g with no cap.

Next, I removed my chisel nib from my marker and added 10-15 drops and the reweighed my refill, as the value decreased, I knew how many grams were transferred to my marker. I continued until I had added 2g to each dried out marker or brought the weight back up to 10g. A word of caution, 11g proved to be too much ink for my markers and I had to do some coloring on a scratch pad to run off the excess, I would stay as close to 10g as possible so you do not waste ink.

I also noted the markers that weighed in at 9g so I would know which refills I need to pick up soon! 

I hope this tutorial was helpful for any other Ciao artists out there, until next time, stay safe in these crafting streets! 

Happy crafting,

Gaby

Building the Workbox 3.0

Friends...I finally got a Workbox!!! It started as me showing the video to my hubby and he said "You should just get it." 24 hours later my pre-order was complete. It arrived about two weeks ago  and honestly, I have been working on it since then. I built it over the course of a few evenings and I just finished putting all of my items into it this past weekend.  I will do another post soon that gives a full look at it, but this post is just about the build and my first impression. To be frank, this is not a single person job, I repeat, find someone to help you! I am an experienced engineer and by the time I was done, I had used several principles of leverage, power tools, and light woodworking; it was a monster. However, once it was finished, it was magnificent! I was able to fit so many supplies in it because of all of the tote storage. Check out some photos below. 

These boxes are in addition to a crate that was about 7' x 3' that I had to leave in my garage. 

This is all of the hardware that comes with the Workbox. 

These tools are included, if you have a decent rubber mallet, use that instead, I found that the head kept popping off of this one. 

End of Day 1. 

End of day 2. 

End of day 3. Putting the shelves in was surprisingly difficult because some of the spacing was really tight. 

As you can see, I started putting things in there right away, and this was when it started to get really fun and exciting. This was also before I installed the crown, which I love, the light is great.

I ordered the magnetic boards for both doors because I have a ton of dies that I wanted to store and this worked beautifully.  Also I ordered the shelf upgrade for the Velcro swing door, but I haven't installed it yet, I'm still debating if I will.

Left side. 

I used my Letratag to put labels on almost all of the totes/shelves because as I was organizing, I realized everything would be in a new place.  That part was super fun too, I went through 3 cartridges! 

I found so many things I had forgotten about and apparently at some point I needed to buy every roll of washi tape known to man, I found at least 30 rolls. I also found duplicates of a few items and this made me realize I will probably spend less on supplies now because I can see everything that I own. I think that is awesome because in just the few weeks that I have had this, I have been able to make more cards and drawings because I'm not wasting g time looking for supplies or trying to find a clean work space. 

My camera even mounts to the top shelf! 

I am so happy with this view; so many of my frequently used supplies are right in front of me. I am still working on organizing a few things as I use it more. In fact, my paper trimmer now has a designated space instead of sitting on top of my Big Shot. 

It is so easy now to sit down and color or stamp, record tutorials, or work on blogging. This was a big expense, but it was really an investment that I think is worth it just for the time and sanity saved.  If you are on the fence about it I can honestly say I am very pleased with this piece and it looks beautiful closed.  I did not show under the table, but my sewing/embroidery machine is under there along with my colored pencils, my Crop-a-Dile Big Bite, my Cinch, my Xyron Creative Stations, and my Fiskars Rotary Cutter, and they all fit comfortably. I am still impressed by how much it actually holds, I was able to put all of my regularly used supplies in there and free up so much space in my closet in the craft room. 

Now that I have completed that, expect regular posts and videos! I have recorded a few but I have to edit them, also I will be doing a full tour of my Workbox soon. As always, thanks for stopping by and happy crafting!