Gab with Gaby

An engineer's creative corner studio.

Crafts

Building the Workbox 3.0

Storage, Craft Room, Workbox, Gab with Gaby Stamps, Decor, Diy, Organization, CraftsGabriela Sims1 Comment

Friends...I finally got a Workbox!!! It started as me showing the video to my hubby and he said "You should just get it." 24 hours later my pre-order was complete. It arrived about two weeks ago  and honestly, I have been working on it since then. I built it over the course of a few evenings and I just finished putting all of my items into it this past weekend.  I will do another post soon that gives a full look at it, but this post is just about the build and my first impression. To be frank, this is not a single person job, I repeat, find someone to help you! I am an experienced engineer and by the time I was done, I had used several principles of leverage, power tools, and light woodworking; it was a monster. However, once it was finished, it was magnificent! I was able to fit so many supplies in it because of all of the tote storage. Check out some photos below. 

IMG_6784.JPG

These boxes are in addition to a crate that was about 7' x 3' that I had to leave in my garage. 

 

IMG_6790.JPG

This is all of the hardware that comes with the Workbox. 

 

IMG_6791.JPG

These tools are included, if you have a decent rubber mallet, use that instead, I found that the head kept popping off of this one. 

 

IMG_6792.JPG

End of Day 1. 

 

IMG_6797.JPG

End of day 2. 

 

IMG_6800.JPG

End of day 3. Putting the shelves in was surprisingly difficult because some of the spacing was really tight. 

 

As you can see, I started putting things in there right away, and this was when it started to get really fun and exciting. This was also before I installed the crown, which I love, the light is great.

As you can see, I started putting things in there right away, and this was when it started to get really fun and exciting. This was also before I installed the crown, which I love, the light is great.

IMG_6870.JPG

I ordered the magnetic boards for both doors because I have a ton of dies that I wanted to store and this worked beautifully.  Also I ordered the shelf upgrade for the Velcro swing door, but I haven't installed it yet, I'm still debating if I will.

Left side. 

Left side. 

I used my Letratag to put labels on almost all of the totes/shelves because as I was organizing, I realized everything would be in a new place.  That part was super fun too, I went through 3 cartridges! 

IMG_6874.JPG

I found so many things I had forgotten about and apparently at some point I needed to buy every roll of washi tape known to man, I found at least 30 rolls. I also found duplicates of a few items and this made me realize I will probably spend less on supplies now because I can see everything that I own. I think that is awesome because in just the few weeks that I have had this, I have been able to make more cards and drawings because I'm not wasting g time looking for supplies or trying to find a clean work space. 

 

My camera even mounts to the top shelf! 

My camera even mounts to the top shelf! 

I am so happy with this view; so many of my frequently used supplies are right in front of me. I am still working on organizing a few things as I use it more. In fact, my paper trimmer now has a designated space instead of sitting on top of my Big Shot. 

IMG_6848.JPG

It is so easy now to sit down and color or stamp, record tutorials, or work on blogging. This was a big expense, but it was really an investment that I think is worth it just for the time and sanity saved.  If you are on the fence about it I can honestly say I am very pleased with this piece and it looks beautiful closed.  I did not show under the table, but my sewing/embroidery machine is under there along with my colored pencils, my Crop-a-Dile Big Bite, my Cinch, my Xyron Creative Stations, and my Fiskars Rotary Cutter, and they all fit comfortably. I am still impressed by how much it actually holds, I was able to put all of my regularly used supplies in there and free up so much space in my closet in the craft room. 

Now that I have completed that, expect regular posts and videos! I have recorded a few but I have to edit them, also I will be doing a full tour of my Workbox soon. As always, thanks for stopping by and happy crafting! 

The Kickstarter has Launched!

Crafts, Drawing, Gab with Gaby Stamps, Paper crafting, Shopping, StampingGabriela SimsComment

Hellooooo everyone! Sorry I have been away for so long, but I have been working on getting my stamp artwork done and creating an enamel pin design.  All of that was for...MY KICKSTARTER! I am beyond thrilled to announce this! I have been working on this project for over a month and there were a few setbacks, but I have all of the samples done and now the campaign is live.  If you order the stamps from the campaign, they will be slightly lower than the individual prices listed here, mainly because I will be making them in much larger quantities, likewise with the enamel pin.  I will be working hard to promote this campaign but I will have more time for card videos now...I remember that I owe you all a video about making a pop-up card, I have filmed it, I just need to edit.  That's all for today, and as always, happy crafting!

 

Gaby

This is the link you can follow to the Kickstarter campaign and below is the video if you want to see a little of my process and listen to me chat.

Product Close Up - Mr. Snugglekins - "I am a Meowfox."

Cards, Color, Crafts, Gab with Gaby Stamps, Shop Updates, Stamps, The Gab with Gaby Shop, Product Release Close Up, Product Release TutorialGabriela SimsComment

Hi everyone, Gaby here with a close up of one of the new stamp sets from the debut launch, Mr. Snugglekins - "I am a Meowfox".  This little guy loves coffee, so he has a coffee cup in his stamp set, but he's a baby meowfox, so he cannot actually drink coffee, so odds are that cup is empty or filled with cocoa.  He also has a heart, hat, scarf, and some word bubbles with translations, since the only word he can say is "Meow".  Here he is in all of his Meowfoxy glory.

He thinks you are a-meow-zing!

He thinks you are a-meow-zing!

Check out the video below to see the entire stamp set and how to make this card.

Thank you so much for stopping by, I am so excited to be able to share this video series.  The next video in the series will feature a box card made with the Meet the Jelly Friends - My Jam! stamp set.  All of the stamp sets are available for pre-order in the shop. Until next time, happy crafting.

Gaby

How to Make a Magic Slider Card

How to, Stamps, Coloring, Color, Cards, Diy, Crafts, Paper crafting, TutorialGabriela SimsComment

Hi everyone! Today I will be showing you how to make a Magic Slider Card using some supplies you already have around.  I am using nesting heart dies from Spellbinders, Neenah Solar White Card Stock in 80# and 110#, Copic Markers, Staz-On Ink, Memento Tuxedo Black Ink, and Distress Ink; all things I have in my craft room.  These cards are super fun to make and they allow a lot of room for creativity.  You can use the traditional shape of a rectangle, or you can use any other shape you have in your die collection.  It would even be fun to do one of these with a jar stamp/die!  Check out the video below for how to make one of your own.  

 

I did not include the dimensions for this because unless you are using this exact set of dies, it will not be very helpful.  The main thing to remember is that you need enough space on each side of the window for the slider to fit in with about 1/4" left for the edges of the stopper, so your slider does not come out of the card.  I wanted to be sure that my coloring did not show through even though I wanted the card to open like a regular card.  

I hope you enjoyed this video and I will be trying to get on a regular posting schedule this year with reviews and craft ideas.  Thanks for stopping by and happy crafting! :)